Mechanical, Electrical and Instrumentation Engineering for Non-Engineers
1. 4-for-3
BOOKING OFFER
plus
our
AUSTRALIA • CANADA • india • IRELAND
Malaysia • NEW ZEALAND • SINGAPORE • SOUTH AFRICA
UNITED KINGDOM • UNITED STATES • VIETNAM
what You will learn:
• Basic mechanical engineering concepts such as force, work, power,
moments and torques
• The importance of common engineering material properties in relation to
component life and failure
• The basics of electrical power engineering
• Practical steps in selection, installation and commissioning of electrical
systems
• How to protect yourself and others from electrical hazards
• The fundamentals of instrumentation and process control
• The basics of Programmable Logic Controllers (PLCs) and SCADA systems
Mechanical,
Electrical and
Instrumentation Engineering
for non-Engineers
• Practical Power System Protection
for Engineers and Technicians
• Fundamentals of Industrial
Automation
• Fundamentals of Mechanical
Engineering
• Practical Project Management for
Engineers and Technicians
Manchester
15 & 16 June 2015
4 for 3 discount Offer - see registration form for details
Technology Training that Works
Geoff Bottrill
HNC, DMS, MIEE
A 2-day practical workshop presented by:
EARLY BIRD
TOTAL VALUE TO YOU - £368
BOOKING OFFER
Book by 18 May 2015 and
you will receive 25% off the full
registration price + 4 eBooks
each with hundreds of pages of
engineering knowledge
who should attend:
• Administration staff
• Civil, mechanical, chemical,
mining engineers, technologists
and technicians
• Electrical contractors
• Finance, IT and accounting
managers
• Human resources managers
• IT personnel
• Legal personnel
• Managers who are involved with or
work with staff and projects in
electrical engineering
• Non-electrical and mechanical
engineers and technicians
• Non-electrical and mechanical
personnel who want to understand
the broader picture
• Non-engineering personnel
• Operators
• Plant and facility engineers
• Procurement and buying staff
• Project managers
• Sales engineers
• Senior managers
Register NOW: Email the registration form to us at uk@idc-online.com
For more information contact (020) 8335 4014 or visit www.idc-online.com
Only £995 per person
excluding VAT
2. the workshop
In two fascinating and intensive but easy-to-understand days you will learn the basic applied
concepts of mechanical, electrical and instrumentation engineering. This will enable you to
work more effectively with your engineering colleagues – no matter whether they are operators,
tradespersons, technicians or engineers.
There are three main threads running through this course – initially mechanical engineering,
then electrical engineering best practice and concluded with instrumentation (or industrial
automation).
Mechanical engineering in simple terms deals with any equipment that moves; this is what
makes it perhaps the most broad and diverse of engineering disciplines. The mechanical
discipline essentially derives its breadth from the need to design and manufacture everything
from small, even nano, individual devices, such as measuring instruments, to large systems
such as machine tools and power plants.
The focus in electrical engineering is on the building blocks of electrical engineering, the
fundamentals of electrical design and integrating electrical engineering know-how into the
other disciplines within an organisation. Unnecessary theory will be minimised.
The dangers and risks from electrocution, shock, explosions and arc blast can never be
eliminated but you can take definite steps to protect yourself and your co-workers.
The topics in instrumentation engineering commence with an introduction to instrumentation
and measurement ranging from pressure, level, temperature and flow devices followed by a
review of process control including the all important topic of PID loop tuning.
Geoff has been working in the instrumentation, measurement and
control fields for over twenty-five years and has spent the past fifteen
years specialising in Hazardous Areas, Intrinsic Safety and
Instrumentation Drawings. Geoff began his career at Kent Instruments
as a service engineer working in both the UK and East Africa. His
experience ranges from systems design functions and on-site trouble
shooting, to technical and commercial customer support.
Recently Geoff has taken on the responsibility of mentoring engineers in training, in addition
to the presentation of engineering workshops in the process control and measurement field.
His positive interactive approach to teaching has made him popular with workshop attendees
worldwide.
Mechanical, Electrical and Instrumentation
discount Offer
SAVE
£995
* discounted and free registration to be
used for the same workshop
in the same venue
BUY Three
GET ONE FREE!
Register three people on a
public two-day workshop and
receive your fourth registration
FREE
An intensive, practical 2-day workshop presented by
Geoff Bottrill HNC, DMS, MIEE
Senior Hazardous Areas Engineer
practical sessions
This is a practical, hands-on workshop enabling you to work through exercises which reinforce
the concepts discussed.
To gain full value from this workshop, please bring your laptop/notebook computer.
free reference manual
as a hard-copy and eBook (Valued at £79.95)
Our delegates don’t just receive photocopied notes!
You will receive a comprehensive fully illustrated reference manual filled
with hundreds of pages of tables, charts, figures and handy hints.
About IDC Technologies
Visit our WEB SITE
www.idc-online.com to download
FREE software and technical information
With a portfolio of over 300 workshops
specialising in the fields of industrial
data communications, telecommunications,
automation and control we have trained over
500,000 engineers, scientists and
technicians over the last 20 years.
Wehaveanenthusiasticteamofprofessionals
in offices conveniently located around the
world, who are committed to providing the
highest quality of engineering and technical
training.
On-Site Training
All IDC Technologies training workshops are
available on an on-site basis, presented at
the venue of your choice, saving delegates
travel time and expenses, thus providing
your company with even greater savings.
SAVE MORE THAN 50% OFF
the per person cost!
2-day courses start from <£3,000
for up to 6 people, and can be
customised to your needs.
Have the training delivered
WHEN AND WHERE you need it!
For more information or a FREE detailed
proposal contact:
Kevin Baker on (020) 8335 4014 or
email: training@idc-online.com
3. Day ONE
MECHANICAL
• Mechanical Engineering Basics
• Engineering Materials
• Gears and Bearings
• Mechanical Drives
• Fluid Engineering
• Heat Transfer
• Maintenance
ELECTRICAL
• Overview of the Electric Power Systems
• Basic Concepts
• Electrical Generation, Transmission and
Distribution
• Electrical Measurements and Applications
• Earthing
• Transformers
• Power Quality
• Power Systems Protection
• Electrical Shock and Methods of Shock
Prevention
• Hazards Due to Electrical Arcing and
Heating
The fee for each workshop covers all materials
including workshop manual, lunches
and refreshments
Day TWO
INSTRUMENTATION
• Introduction to Process Measurement
• Pressure Measurement
• Level Measurement
• Temperature Measurement
• Flow Measurement
• Fundamentals of Programmable Logic
Controllers (PLCs)
• Introduction to SCADA Systems
SUMMARY, OPEN FORUM
AND CLOSING
Engineering for non-Engineers
the program
4. Manchester - 15 & 16 June 2015
Contact us for venue details
Contact: Company Name:
Company Address:
City: County: Post Code:
Phone: Fax: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Mr/Ms: Job Title: Email:
Should you have more people interested in attending this workshop, please contact Carol or Alison on (020) 8335 4014 or email: uk@idc-online.com
Delegate Details
Mechanical, Electrical and Instrumentation Engineering for non-Engineers
Please register by 25 May
to avoid disappointment
Attendees:
workshop Details
Register three people on a public two-day workshop and receive your fourth registration FREE
* discounted and free registration to be used for the same workshop in the same venue.
discount offer - save £995 - BUY Three, GET ONE FREE!
BOOKING FOR ONE DELEGATE: £995 x ______ delegates = £______________
BOOKING FOR four DELEGATES: £995 x ______ delegates = £______________
The fourth participant is FREE
early bird booking offer: (if booking on or before 18 May 2015)
YES, I qualify and would like to receive my 4 FREE eBooks
PLUS 25% OFF the registration price less 25% = £______________
+ VAT = £______________
total = £______________
I wish to pay by Cheque, made payable to IDC Technologies
Company Order Number: __________________________________
Please charge my Mastercard Visa Expiry Date: ____/_____
______________________________________________________________
Cardholder’s Name:
Cardholder’s Signature
On the reverse of your card, above the signature,
is a security number. In order to authorise your
card transaction, we require the last 3 digits:
If the Cardholder's address
is not the same as shown
above please tick this box:
Please Note: Full payment is required prior to the commencement of the workshop.
1
3
payment Details Note: Prices are EXCLUSIVE of VAT
ABN 78 003 263 189Web Site:
www.idc-online.com
Email:
uk@idc-online.com
Mail:
IDC Technologies, Suite 18,
Fitzroy House, Lynwood Drive,
Worcester Park, Surrey, KT4 7AT
Fax:
(020) 8335 4120
register
now:
enquiries:
Phone:
(020) 8335 4014
Received a brochure in the mail
Received an email from IDC
Searched online (Google, Yahoo etc)
Recommended by a friend/colleague
Other (please specify) ________________________
______________________________________________
______________________________________________
______________________________________________
how did you hear about this
workshop?
workshop details
• Workshops start at 8:30am and finish at 5:00pm daily.
• Registration is from 8:00am on the first day.
• The workshop fees are per delegate and include a reference
manual, handouts, lunches and all refreshments.
• Full payment is required prior to the commencement of the
workshop.
Early Bird BOOKING Offer
Please note that the Early Bird Booking Offer is only available
to those registrations received by 18 May 2015 and paid prior
to the commencement of the workshop.
Cancellation
A fee of 20% will apply for written cancellations received
7-14 days prior to the commencement of the workshop.
Cancellations received less than 7 days prior to the workshop
are not refundable however substitutes are welcome.
Confirmation
Confirmation will be sent upon receipt of registration. Full
details and workshop instructions will be sent to you prior to
the workshop date.
Please Note
Venues to be confirmed upon registration. Venues are subject
tochange. Instructors may change without notice.
IDC Technologies has no affiliation with suppliers or
manufacturers and therefore presents a completely unbiased
factual view of the industry.
100% MONEY BACK GUARANTEE
IDC Technologies’ engineers have put considerable time and
experience into ensuring that you derive the maximum value
from each workshop. If you feel by lunch time of the first day
that the workshop is not appropriate, please let us know so
that we can arrange a 100% refund of your fee.
Privacy Information
If your address details are incorrect, or you wish to remove
your name from our mailing list, please contact us by phone,
fax or email.
At times we make use of lists that cannot be cross-checked
against our own database and you may receive a duplicate.
If so, please pass this on to an interested colleague.
Continuing Professional Development (CPD)
This program is designed to meet your continuing professional
development requirements. A certificate documenting your
attendance will be awarded at the end of the workshop. This
serves as important evidence of your continuing professional
commitment to your career.
www.idc-online.com