2. STEPS TO FOLLOW WHEN WIRING A HOUSE.
1. SLAB TUBING
2. CHISELING AND MOUNTING OF BOXES
3. TUBING
4. WIRING
5. INSTALLATION OF FITTINGS
6. TESTING
3. SLAB TUBING.
What is slab tubing?This is the
laying of electrical conduit pipes
in the slab.
Basically this involves the tubing
for electrical socket outlets,
cooker outlets, telephone, and
data socket outlets.
4. At this point, you are done with
the slab and you have belt all the
walls.
This is a phase where you start
chiseling walls for you to start to
mount the meter box, distribution
board, switch boxes and socket
boxes,
cooker control box and many
more points like air conditioning
outlets and TV sockets or
television points
. I feel I should mention it here
that if you did not do a slab
tubing, this is the right time for
you to do all the points for
sockets, telephone, and data
CHISELING AND MOUNTING OF BOXES
5. TUBING
Tubing or laying of conduit pipes is a phase where
you are done with roofing and you are looking
forward to do your ceiling.
Tubing at this stage consists of interlinking of
lighting, power, tv, telephone and data circuits.
You are simply creating a way through which you
will pass your wiring cables. That is from the
distribution board to various circuits in the home.
6. ELECTRICAL WIRING
This is a stage where you start putting cables in
the conduit pipes . At this stage, you are done
with tubing of various circuits in a house. Below is
a list of circuit to be wired.
1. LIGHTING
2. POWER SOCKETS
3. GEYSER
4. AIR CONDITIONER
5. TV
6. TELEPHONE AND DATA
7. INSTALLATION OF LIGHT FITTINGS
This is a stage or phase in house wiring where you start to install your fixtures.
This is usually done after you have finished wiring all your circuits. Below is a list
of fittings to be installed.
1. LIGHT FITTING
2. SOCKETS
3. SWITCHES
4. COOKER CONTROL UNITS
5. CIRCUIT BREAKERS
6. PHOTOCELL.
8. For more details check the link bellow.
click here for details
https://theoppowersolutions.com/electrical-wiring-for-a-house/