SlideShare uma empresa Scribd logo
1 de 39
Baixar para ler offline
“INFRARED SPECTROSCOPY”
1/26/2018 1M.Zain Idrees
INFRARED SPECTROSCOPY
IR spectroscopy is the spectroscopy that deals with the infrared region of the electromagnetic
spectrum, that is light with a longer wavelength and lower frequency than visible light
Infrared spectroscopy (IR) measures the bond vibration frequencies in a molecule and is used
to determine the functional groups.
The infrared region of the spectrum encompasses radiation with wave numbers ranging from
about 12,500 to 50cm-1 (or) wave lengths from 0.8 to 200μ.
Infrared region lies between visible and microwave region.
Infrared Spectroscopy is the analysis of infrared light interacting with a molecule.
It is based on absorption spectroscopy
1/26/2018 2
INFRARED REGIONS
INFRARED REGIONS RANGE
Near infrared region 0.8-2.5 µ (12,500-4000 cm-1)
Main infrared region 2.5-15 µ (4000-667cm-1)
Far infrared region 15-200 µ (667-100 cm-1)
1/26/2018 3
The infrared region constitutes 3 parts
a) The near IR (0.8-2.5μm) (12,500-4000cm-1)
b) The middle IR (2.5 -15μm) (4000-667cm-1)
i) Group frequency Region (4000-1500cm-1)
ii) Finger print Region (1500-667cm-1)
c) The far IR (15-200μm) (667-50cm-1)
• most of the analytical applications are confined to the middle IR region because absorption
of organic molecules are high in this region.
• Wave number is mostly used measure in IR absorption because wave numbers are larger
values & easy to handle than wave length which are measured in μm.
E = hν= hc/λ= hcν ̄
• It gives sufficient information about the structure of a compound.
1/26/2018 4
PRINCIPLE
When infrared radiation is passed through an organic compound some of the frequencies are
absorbed and appear as absorption band while other frequencies are do not intrect with the
compound and are transmitted without being absorbed.Only those frequencies are absorbed
which match with the vibrational frequencies of the bonds.
IR sectroscopy is there for basically vibrational spectroscopy .
The absorption of ir radiation is associated with the excitatio of the molecule from the ground
state to higher vibrational state.
The absorbed energy is eventually released as heat and the molecule revert from the excited
state to the orignal ground state.
1/26/2018 5
1/26/2018 6
Conti...
Fundamental Vibrations:
vibrational frequencies which are concerned with the individual atom called Fundamental
vibration.
Non Fundamental vibration:
Vibrations which apears as a result of fundamental vibrations.
Stretching vib:
Involves a continuous change in interatomic distance along the axis of the bond between 2
atoms
Involves the change in angle btw the two bonds
1/26/2018 7
Interatomic distance btw the two atoms increase or decrease
Interatomic distance btw the two atoms is Opposite or alternate
All the atoms are in same plane
2 atoms are in same plane and 1 is on opposite plane
1/26/2018 8
Scissoring:
In this case, the two atoms connected to a central atom either move toward or away from each
other with certain deformation of the valence angle.
Rocking:
In this case, the structural unit swings back and forth in the plane of the molecule.
Wagging:
In this case the structural unit swings back and forth out of the plane of the molecule.
Twisting:
In this case the structural unit rotates about the bond that joins it to the rest of the
molecule.
1/26/2018 9
Over tone:
Some additional absorption bands may be observed which are genrated by the modulation of
the fundamental frequencies. This leads to the overtone that appear at almost twice and thrice
the fundamental frequencies with greatly reduced intensties.
Combination tone:
Week band that apeares occasionally at frequencies that are sum or difference of 2 or more
fundamental bands.
Combination band arises when absorption by a molecule result in excitation of two fundamental
vibrations simutaneously. This happen when a single photon has precisely the correct energy to
excite the two vibrations. In such cases the frequency of the combination band must be the
exact sum of the two fundamental absorption frequencies. More than two fundamental
frequencies may be involved in combinaton band.
The difference band arises when a molecule already existing in an excited vibrational state
absorbes enough additional energy to be excited to another vibrational level of a different
vibrational mode.
1/26/2018 10
Fermi resonance:
Interaction btw fundamental vib and combination tones overtones
 occurs when atoms in a molecule are in periodic motion while the molecule as a whole has
constant translational and rotational motion.
 The frequency of the periodic motion is known as a vibration frequency.
 The value of stretching vibrational frequency of a bond can be calculated by the application
of Hooke's law.
 We can also calculate an approximate value of the stretching vibrational frequency of a bond
by treating the two atoms and their connecting bond, to first approximation, as two balls
connected by a spring, acting as a simple harmonic oscillator for which the Hooke’s Law
may be applied.
 According to Hooke’s Law , The Stretching frequency is related to the masses of the atom
and the force constant(a measure of resistance of a bond to stretching) of a bond by the
following equation
1/26/2018 11
1/26/2018 12
Conjugation:Any factor the tend to increase the contribution of the singe bond form will
decrease the force constant of the carbon oxygen bond hence result in lowering the the
frequency of C=O stretching vib. e.g. conjugation lowersthe C=O stretching frequency whether
the conjugation is brought about by αβ-unsaturation or by an atomic ring.
Mesomeric effect:Any substituent that enhance the singke bond character will decrease the
bond order of C=O group and leads o lower the stretching frequency.
A +M group lower the stretching freq.-M group have opposite effect.
Inductive effect:substituent with an electron donating inductive effect(+I) will enhance the
single bond character of the C=O group. (-I) group have opposite effect.
1/26/2018 13
1/26/2018 14
Double bond carbon atom in unstrained molecules have planer trigonal geometry with a bond
angle of 120°
Increase in absorption freq with the decrease in bond angle can be explained in terms of bond
angular strain.Reduction in bond angle below 120 leads to an increased in s character in double
bond resulting in shortening and strengthening of a double bond.
It is observed in compounds containing -CH2 and -CH3.
e.g Carboxlic acid anhydride,amides
1/26/2018 15
There are 2 types of infrared spectrophotometer, characterized by the manner in which the ir
frequencies are handled.
– 1) dispersive type (IR)
– 2) interferometric type(FTIR)
In dispersive type the infrared light is separated into individual frequencies by dispersion, using
a grating monochromator.
In interferometric type the ir frequencies are allowed to interact to produce an interference
pattern and this pattern is then analyzed, to determine individual frequencies and their
intensities.
1/26/2018 16
It is double beam instrument.The main components of Dispersive ir spectrophotometer are:
Radiation source
Sample compartment
opticle chopper
monochrometer
detector
amplifier
readout device
1/26/2018 17
1/26/2018 18
1)Infrared Sources
The most common source is either Nernst filament or Globar
The Nernst filament is composed of a mixture of oxide of zirconium,thorium and yattrium, which
is formed into a hollow rod about 2mm in diameter and 2-5 cm in length.
Globar is a bonded silicon carbide rod about 7mm in diameter and 5 cm in length. On heating
electrically (1000-1800C) these rods emit infrared radiations.
2)Sampling Area(Optical null method):
The radiation is divided into two beams of equal intensties which are focused into the sampling
area. One beam pass through the sample while the other serves as the reference
beam.Absorption by the sample is measured directly from the difference in intensties of two
beams. The intensity difference is usually measured by optical null method inthis instrument. In
this method afer passing through the sampling area the reference beam pass through an optical
wedge which limits the amount of radiation that passes through it.
3)Chopper:
The two beams are now reflected to a light chopping device.As the chopper rotates it causes
the sample beam and reference beam to be reflected aternately to the monochromator.
1/26/2018 19
4)Monochromators
Three types of substances are normally employed as monochromators, namely :
(i) Metal Halide Prisms : Various metal halide prisms, such as : KBr (12-25 μm), LiF (0.2-6 μm)
and CeBr (15-38 μm) have been used earlier, but they have become more or less obsolescent
nowadays.
(ii) NaCl Prism (2-15 μm) : Sodium chloride prism are of use for the whole of the region from
4000- 650 cm–1. First, it offers low resolution at 4000-2500 cm–1, and secondly, because of its
hygroscopic nature the optics have got to be protected at 20 °C above the ambient temperature.
(iii) Gratings : In general, gratings are commonly employed in the design of the instruments and
offer better resolution at higher frequency than the prisms. They offer much better resolution at
low frequency, viz., typical rulings are 240 lines per nm for the 4000-1500 cm–1 region and 120
lines per nm for the 1500-650 cm–1 region.
1/26/2018 20
5)Detectors
a)Thermocouples (or Thermopiles):
The underlying principle of a thermocouple is that if two
dissimilar metal wires are joined head to tail, then a difference in temperature between head
and tail causes a current to flow in the wires. In the infrared spectrophotometer this current shall
be directly proportional to the intensity of radiation falling on the thermocouple. Hence, the
thermocouples are invariably employed in the infrared region, and to help in the complete
absorption of ‘available energy’ the ‘hot’ junction or receiver is normally blackened.
b)Golay Detector:
In this specific instance the absorption of infrared radiation affords expansion of an inert gas in a
cell-chamber. One wall of the cell-chamber is provided with a flexible mirror and the resulting
distortion alters the intensity of illumination falling on a photocell from a reflected beam of light.
Thus, the current from the photocell is directly proportional to the incident radiation.
1/26/2018 21
c)Bolometer: Working:
1/26/2018 22
d)Thermistors
•It is made up of metal oxides.
•It functions by changing resistance when
heated.
•It consists of two closely placed thermistor
flakes, one of the 10 um is an active detector,
while the other acts as the compensating /
reference detector.
•A steady voltage is applied, due to the
temperature increase there is change in
resistance which is measured and this gives
the intensity of the IR radiation
1/26/2018 23
6)Recording:
When the sample has absorbed radiation of a perticular frequency,the detector will be receiving
alternately an intense reference beam and weak sample beam.This will in effect lead to an
alternating current which is flown to an amplifier.The amplifier is coupled coupled to small
sevo-meter which drives the optical wedge into the reference beam untl the detector receives
radiations of equal intensties from the sample and the reference beams until the difference in
intensties of the two beams is zero or in other words the instrument is at an optical null.
The wedge is coupled to a recorder pen so that the movement of the wedge in and out of the
reference beam is accompained by movement of a pen on the printed paper which thus records
the absorption bands.
1/26/2018 24
a)Gas Sample:
A gas sample is introduced into an evacuated gas cell.Gas cells are available in lenghts ranging
from a few cm to some meters. The sampling area of standard dispersive IR spectrophotometer
is about 10cm. So long path are achieved by using multiple pass gas cells in which internal
mirrors permit the beam to be reflected several times through the sample before it exits the gas
cell.
b)Liquid Sample:
It is examined as thin film squeezed btw two optically polished circular flat plates(about 5mm
thick and 25mm in dm) of rock salt(NACl).
Pressing a small drop of liquid sample btw the plates produces a film of about 0.1mm thick.
The plates are held together by capillary action are mounted in sample beam.
Plates are cleaned and dried immediately after use by rinsing in suitable solvent such as
chloroform.
1/26/2018 25
c)Solid Sample:
Mull technique:
Mulls are prepared by grinding 2-5mg of sample in smooth mortar with pestle of agate,adding 1
or 2 drops of mulling agent and continue grinding to get a homogenous paste.The mull is
examined as thin film btween the NACl plates.
Nujol is commonly used as mulling agent.
Pressed Pellet Technique:
Grind and mix about 1.0mg of solid sample with about 100mg of dry powdered KBr in mortar. to
prepare KBr discs.
Then this solid solution is compressed under pressure (about 20,000 psi) in vacuo with a
special die to form transparent disc. Discs are usually 10mm in diameter and 1mm thick.
KBr does not absorb in the IR region so complete spectrum of sample is obtained.
1/26/2018 26
d)Sample As Solution:
Sample can also be examined as solution in solvents such as CCl4 or Chloroform.
Solutions(1-5%) are handled in cells of 0.1-1.0mm pathlength.
A 2nd cell containing pure solvent is placed in reference beam.
The wavelength (or wave number) scale calibration of infrared spectrophotometers is usually
carried out with the aid of a strip of polystyrene film fixed on a frame. It consists of several sharp
absorption bands, the wavelengths of which are known accurately and precisely. Basically, all
IR-spectrophotometers need to be calibrated periodically as per the specific instructions so as to
ascertain their accuracy and precision.
1/26/2018 27
An infrared spectrum may be divided into 2 parts. the part ranging from 4000-1600cm-1 is known
as Functional group region,while that ranging from 1600-625cm-1 is called Fingerprint
region.
Functional group region:
In this region most compounds have only a few strong bands due to the characteristic stretching
vibration of their functional groups.
For example the functional group of X-H type (C-H,O-H) absorb in the region 3700-2500 cm-1.
Absorption due to triple bond occur 2300-2100cm-1 and due to double bond at 1900-1600cm-1.
Fingerprint region:
It is much more difficult to pick out individual bonds in this region than it is in the "cleaner" region
at higher wavenumbers. The importance of the fingerprint region is that each different
compound produces a different pattern of troughs in this part of the spectrum. e.g Characteristic
absorption bands corresponding to aromatic ring system fall in the 1600-1450cm-1.
Aromatic compounds display strong adrosption bands in 900-700cm-1.
1/26/2018 28
A method of obtaining an Infrared spectrum by measuring the interferogram of a sample using
an interferometer, then performing a Fourier Transform upon the interferogram to obtain the
spectrum.
It is single beam instrument.
The Interferometer:
An device in which two or more radiation beams interfere with each other after passing through
different optical paths. The interferometer produces a unique type of signal which has all of the
infrared frequencies “encoded” into it. The output is an interferogram or interference record. The
two domains of Distance and Frequency are inter convertible by the mathematical method of
Fourier transformation.
Majority of commercially avaiable FT-IR are based on an inetrferometer commonly Michelson
interferometer.
1/26/2018 29
1/26/2018 30Michelson Interferometer
Michelson interferometer:
It has three basic components a beam splitter,fixed mirror, and a moveable mirror.
Beam splitter is semi-reflecting device so that 50% oof light impinging on it is transmitted while
the remaining 50% is reflected. It is either a Partially silvered mirror or thin film of germanium
(Ge) sendwiched btw two KBr plates.
IR light received from source is split into two identical beams by the beam splitter such that one
beam is reflected to the fixed flat mirror while the other beam is transmitted to the moveable flat
mirror.
The two beams are reflected back by their respective mirrors to recombine at the beam splitter
to again form one beam which passes through the sample and is then focused on detector. Of
course,each of the two beams reflected back by their respective mirror is again split into two
equal halves by the beam splitter.one half of each beam goes to detector while the half of each
beam goes back to the source.The sample can be use directly without the prepration of mull or
KBr discs or solution.
1/26/2018 31
Detectors of FT-IR:
1. Pyroelectric detectors a thin, Pyroelectric crystals such as
deuterated triglycine sulfate (DTGS) or LITA (lithium tantalate),
When a pyroelectric material is polarized by an electric field, it
remains polarized after the field is removed due to an effect
called residual electric polarization. This residual polarization is
sensitive to changes in temperature.
2. Photoconductive detectors show an increase in electrical
conductivity when illuminated with IR radiation, They have a
rapid response and high sensitivity. The most commonly used
photoconductive detector is the MCT (Mercury Cadmium
Telluride), which must be cooled to liquid nitrogen temperatures
for proper operation.
1/26/2018 32
Advantages of Fourier transform IR over dispersive IR
• Improved frequency resolution
• Improved frequency reproducibility (older dispersive instruments must be recalibrated for
each session of use)
• Faster operation
• Computer based (allowing storage of spectra and facilities for processing spectra)
• Energy limiting accessories such as diffuse reflectance or FT-IR microscopes
• High resolution experiments (as high as 0.001 cm-1 resolution)
• Trace analysis of raw materials or finished products
• Depth profiling and microscopic mapping of samples
• Kinetics reactions on the microsecond time-scale
• Analysis of chromatographic and thermogravimetric sample fractions
1/26/2018 33
Interferogram:
The light signal measured by the detector is known as Interferogram.
An interferogram is time domain interference signal,and represents the detector's response to
the itensity changes against time within the mirror scan.
Movement of the moveable mirror back and forth once is known as scan.
Fourier Transformation:
The time domain interferogram obtained as detector's response cannot be interpreted as such.It
is subjected to furier transformation (a mathematical operation performed by an attached
computer) which converts it into a frequency-domain spectrum.
1/26/2018 34
1/26/2018 35
• A = Infrared source
• B = Sample beam
• C = Chopper
• D = Monochromator grating
• E = Detector thermopile
• F = Amplifier
• G = Servo-motor
• H = An optical Wedge
• I = Prism
• J = Ink-pen recorder
• K = Slits
1/26/2018 36
APPLICATIONS OF IR SPECTROSCOPY
Structure determination:
IR spectroscopy i mainly used for determination of structure of organic compounds by
correlation and interpretation of IR spectra.
Identification of Substances:
• To compare spectrums.
• No two samples will have identical IR spectrum.
• Criteria: Sample and reference must be tested in identical conditions, like physical state,
temperature, solvent, etc.
Determination of Molecular Structure
• Used along with other spectroscopic techniques. Identification is done based on position of
absorption bands in the spectrum. Eg.: C=O at 1717 cm-1.
• Absence of band of a particular group indicates absence of that group in the compd.
1/26/2018 37
Detection of Impurities
• Determined by comparing sample spectrum with the spectrum of pure reference compound.
• Eg.: ketone impurity in alcohols.
• Detection is favoured when impurity possess a strong band in IR region where the main
substance do not possess a band.
Progress of Reactions
• Observing rate of disappearance of characteristic absorption band in reactants or
• Rate of increasing absorption bands in products of a particular product.
Presence of Water in Sample
If lattice water is present, spectra will contain 3 characteristic bands  at 3600-3200cm-1,
1650cm-1 and 600-300cm-1.
Application In Industry
Determine impurities in raw materials (to ensure quality products). For Quality Control checks;
to determine the % of required product. Identification of materials made in industrial research
labs, or materials of competitors. E.g.: Impurity in bees wax (with petroleum wax)
1/26/2018 38
Reference:
Books
Organic spectroscopy and Chromatography by M.Younas
Pharmaceutical Drug Analysis By Ashutosh Kar
Web
https://www.chemguide.co.uk
https://www.slideshare.net
1/26/2018 39

Mais conteúdo relacionado

Mais procurados

Infra Red Spectroscopy and Its Applications
Infra Red Spectroscopy and Its ApplicationsInfra Red Spectroscopy and Its Applications
Infra Red Spectroscopy and Its ApplicationsVikram Choudhary
 
I R spectroscopy & its application
I R spectroscopy & its application I R spectroscopy & its application
I R spectroscopy & its application Amit Agnihotri
 
Infrared spectroscopy
Infrared spectroscopyInfrared spectroscopy
Infrared spectroscopyAsma Ashraf
 
Supercritical fluid chromatography
Supercritical fluid chromatographySupercritical fluid chromatography
Supercritical fluid chromatographySagar Savale
 
NMR SPECTROSCOPY
NMR SPECTROSCOPYNMR SPECTROSCOPY
NMR SPECTROSCOPYVidyaNani
 
DIODE ARRAY AND FLUORESCENCE DETECTOR
DIODE ARRAY AND FLUORESCENCE DETECTORDIODE ARRAY AND FLUORESCENCE DETECTOR
DIODE ARRAY AND FLUORESCENCE DETECTORsharmeenkhan15
 
UV-Visible Spectroscopy
UV-Visible SpectroscopyUV-Visible Spectroscopy
UV-Visible SpectroscopySudha Reddy
 
Basic Concepts of UV & IR Spectroscopy
Basic Concepts of UV & IR SpectroscopyBasic Concepts of UV & IR Spectroscopy
Basic Concepts of UV & IR SpectroscopyDrBasavarajaiahSm
 
Sampling techniques of Infrared Spectroscopy
Sampling techniques of Infrared SpectroscopySampling techniques of Infrared Spectroscopy
Sampling techniques of Infrared SpectroscopyPARITALA JAGADEESH
 
Instrumentation of IR spectroscopy
Instrumentation of IR spectroscopyInstrumentation of IR spectroscopy
Instrumentation of IR spectroscopyTalha Liaqat
 
uv -visible spectroscopy
 uv -visible spectroscopy uv -visible spectroscopy
uv -visible spectroscopykeshav pai
 
Sampling of solids in IR spectroscopy
Sampling of solids in IR spectroscopySampling of solids in IR spectroscopy
Sampling of solids in IR spectroscopyManoj Kumar Tekuri
 
Theory of IR spectroscopy
Theory of IR spectroscopyTheory of IR spectroscopy
Theory of IR spectroscopychiranjibi68
 
uv -visible spectroscopy
uv -visible spectroscopyuv -visible spectroscopy
uv -visible spectroscopyyogitamandlik2
 
Flame emission spectroscopy
Flame emission spectroscopyFlame emission spectroscopy
Flame emission spectroscopyMehulJain143
 
INSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRY
INSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRYINSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRY
INSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRYAshwini Somayaji
 

Mais procurados (20)

Infra Red Spectroscopy and Its Applications
Infra Red Spectroscopy and Its ApplicationsInfra Red Spectroscopy and Its Applications
Infra Red Spectroscopy and Its Applications
 
IR Spectroscopy
IR Spectroscopy IR Spectroscopy
IR Spectroscopy
 
FTIR vs Dispersive IR
FTIR vs Dispersive IRFTIR vs Dispersive IR
FTIR vs Dispersive IR
 
Double resonance
Double resonanceDouble resonance
Double resonance
 
I R spectroscopy & its application
I R spectroscopy & its application I R spectroscopy & its application
I R spectroscopy & its application
 
Infrared spectroscopy
Infrared spectroscopyInfrared spectroscopy
Infrared spectroscopy
 
Supercritical fluid chromatography
Supercritical fluid chromatographySupercritical fluid chromatography
Supercritical fluid chromatography
 
NMR SPECTROSCOPY
NMR SPECTROSCOPYNMR SPECTROSCOPY
NMR SPECTROSCOPY
 
DIODE ARRAY AND FLUORESCENCE DETECTOR
DIODE ARRAY AND FLUORESCENCE DETECTORDIODE ARRAY AND FLUORESCENCE DETECTOR
DIODE ARRAY AND FLUORESCENCE DETECTOR
 
UV-Visible Spectroscopy
UV-Visible SpectroscopyUV-Visible Spectroscopy
UV-Visible Spectroscopy
 
Basic Concepts of UV & IR Spectroscopy
Basic Concepts of UV & IR SpectroscopyBasic Concepts of UV & IR Spectroscopy
Basic Concepts of UV & IR Spectroscopy
 
Sampling techniques of Infrared Spectroscopy
Sampling techniques of Infrared SpectroscopySampling techniques of Infrared Spectroscopy
Sampling techniques of Infrared Spectroscopy
 
Instrumentation of IR spectroscopy
Instrumentation of IR spectroscopyInstrumentation of IR spectroscopy
Instrumentation of IR spectroscopy
 
uv -visible spectroscopy
 uv -visible spectroscopy uv -visible spectroscopy
uv -visible spectroscopy
 
Sampling of solids in IR spectroscopy
Sampling of solids in IR spectroscopySampling of solids in IR spectroscopy
Sampling of solids in IR spectroscopy
 
Theory of IR spectroscopy
Theory of IR spectroscopyTheory of IR spectroscopy
Theory of IR spectroscopy
 
Uv visible spectroscopy
Uv visible spectroscopyUv visible spectroscopy
Uv visible spectroscopy
 
uv -visible spectroscopy
uv -visible spectroscopyuv -visible spectroscopy
uv -visible spectroscopy
 
Flame emission spectroscopy
Flame emission spectroscopyFlame emission spectroscopy
Flame emission spectroscopy
 
INSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRY
INSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRYINSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRY
INSTRUMENTATION OF UV-VISIBLE SPECTROPHOTOMETRY
 

Semelhante a Infrared / IR spectroscopy

Basics of Infrared Spectroscopy : Theory, principles and applications
Basics of Infrared Spectroscopy : Theory, principles and applicationsBasics of Infrared Spectroscopy : Theory, principles and applications
Basics of Infrared Spectroscopy : Theory, principles and applicationsHemant Khandoliya
 
Spectroscopy_4.pptx
Spectroscopy_4.pptxSpectroscopy_4.pptx
Spectroscopy_4.pptxMateenAli27
 
IR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdf
IR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdfIR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdf
IR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdfDr. Sudheer Kumar Kamarapu
 
Basic concepts of organic spectroscopy
Basic concepts of organic spectroscopyBasic concepts of organic spectroscopy
Basic concepts of organic spectroscopyDrBasavarajaiahSm
 
Field Ion - Infrared- Raman Spectroscopy
Field Ion - Infrared- Raman SpectroscopyField Ion - Infrared- Raman Spectroscopy
Field Ion - Infrared- Raman SpectroscopySAMEER VISHWAKARMA
 
instrupres-140329002030-phpapp01 (1).pdf
instrupres-140329002030-phpapp01 (1).pdfinstrupres-140329002030-phpapp01 (1).pdf
instrupres-140329002030-phpapp01 (1).pdfSHREYAL7
 
Fourier Transform Infrared Spectroscopy Ftir
Fourier Transform Infrared Spectroscopy FtirFourier Transform Infrared Spectroscopy Ftir
Fourier Transform Infrared Spectroscopy FtirGamal Abdel Hamid
 
Infrared spectroscopy
Infrared spectroscopyInfrared spectroscopy
Infrared spectroscopyNida Ashraf
 
Ms infrared spectroscopy
Ms infrared  spectroscopyMs infrared  spectroscopy
Ms infrared spectroscopyMISHUSINGH1
 
UV Spectroscopy and Its Applications
UV Spectroscopy  and Its ApplicationsUV Spectroscopy  and Its Applications
UV Spectroscopy and Its ApplicationsVikram Choudhary
 
IR SPECTROSCOPY.pptx
IR SPECTROSCOPY.pptxIR SPECTROSCOPY.pptx
IR SPECTROSCOPY.pptxManimegalaiG3
 

Semelhante a Infrared / IR spectroscopy (20)

IR spectroscopy.pptx
IR spectroscopy.pptxIR spectroscopy.pptx
IR spectroscopy.pptx
 
IR Spectroscopy.pdf
IR Spectroscopy.pdfIR Spectroscopy.pdf
IR Spectroscopy.pdf
 
Introduction to ir spectroscopy
Introduction to ir spectroscopyIntroduction to ir spectroscopy
Introduction to ir spectroscopy
 
Basics of Infrared Spectroscopy : Theory, principles and applications
Basics of Infrared Spectroscopy : Theory, principles and applicationsBasics of Infrared Spectroscopy : Theory, principles and applications
Basics of Infrared Spectroscopy : Theory, principles and applications
 
Infrared spectroscopy i
Infrared spectroscopy  iInfrared spectroscopy  i
Infrared spectroscopy i
 
Spectroscopy_4.pptx
Spectroscopy_4.pptxSpectroscopy_4.pptx
Spectroscopy_4.pptx
 
IR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdf
IR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdfIR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdf
IR Spectroscopy - Sudheerkumar Kamarapu, M. Pharmacy Lecture pdf
 
Radiology.pptx
Radiology.pptxRadiology.pptx
Radiology.pptx
 
Basic concepts of organic spectroscopy
Basic concepts of organic spectroscopyBasic concepts of organic spectroscopy
Basic concepts of organic spectroscopy
 
Field Ion - Infrared- Raman Spectroscopy
Field Ion - Infrared- Raman SpectroscopyField Ion - Infrared- Raman Spectroscopy
Field Ion - Infrared- Raman Spectroscopy
 
IR SPECTROSCOPY 23.02.17
IR SPECTROSCOPY 23.02.17IR SPECTROSCOPY 23.02.17
IR SPECTROSCOPY 23.02.17
 
instrupres-140329002030-phpapp01 (1).pdf
instrupres-140329002030-phpapp01 (1).pdfinstrupres-140329002030-phpapp01 (1).pdf
instrupres-140329002030-phpapp01 (1).pdf
 
Fourier Transform Infrared Spectroscopy Ftir
Fourier Transform Infrared Spectroscopy FtirFourier Transform Infrared Spectroscopy Ftir
Fourier Transform Infrared Spectroscopy Ftir
 
Infrared spectroscopy
Infrared spectroscopyInfrared spectroscopy
Infrared spectroscopy
 
Spectroscpoic techniques
Spectroscpoic techniquesSpectroscpoic techniques
Spectroscpoic techniques
 
Ms infrared spectroscopy
Ms infrared  spectroscopyMs infrared  spectroscopy
Ms infrared spectroscopy
 
UV Spectroscopy and Its Applications
UV Spectroscopy  and Its ApplicationsUV Spectroscopy  and Its Applications
UV Spectroscopy and Its Applications
 
IR SPECTROSCOPY.pptx
IR SPECTROSCOPY.pptxIR SPECTROSCOPY.pptx
IR SPECTROSCOPY.pptx
 
IR spectroscopy -Kaviya.pptx
IR spectroscopy -Kaviya.pptxIR spectroscopy -Kaviya.pptx
IR spectroscopy -Kaviya.pptx
 
Ir spectroscopy slide
Ir spectroscopy slideIr spectroscopy slide
Ir spectroscopy slide
 

Último

Theory of indicators: Ostwald's and Quinonoid theories
Theory of indicators: Ostwald's and Quinonoid theoriesTheory of indicators: Ostwald's and Quinonoid theories
Theory of indicators: Ostwald's and Quinonoid theoriesChimwemweGladysBanda
 
Introduction about protein and General method of analysis of protein
Introduction about protein and General method of analysis of proteinIntroduction about protein and General method of analysis of protein
Introduction about protein and General method of analysis of proteinSowmiya
 
Solid waste management_13_409_U1_2024.pptx
Solid waste management_13_409_U1_2024.pptxSolid waste management_13_409_U1_2024.pptx
Solid waste management_13_409_U1_2024.pptxkrishuchavda31032003
 
Advance pharmacology presentation..............
Advance pharmacology presentation..............Advance pharmacology presentation..............
Advance pharmacology presentation..............SIMRAN VERMA
 
Phagocytosis Pinocytosis detail presentation
Phagocytosis Pinocytosis detail presentationPhagocytosis Pinocytosis detail presentation
Phagocytosis Pinocytosis detail presentationdhaduknevil1
 
Description of cultivating Duckweed Syllabus.pdf
Description of cultivating Duckweed Syllabus.pdfDescription of cultivating Duckweed Syllabus.pdf
Description of cultivating Duckweed Syllabus.pdfHaim R. Branisteanu
 
Preparation of enterprise budget for integrated fish farming
Preparation of enterprise budget for integrated fish farmingPreparation of enterprise budget for integrated fish farming
Preparation of enterprise budget for integrated fish farmingbhanilsaa
 
Skin: Structure and function of the skin
Skin: Structure and function of the skinSkin: Structure and function of the skin
Skin: Structure and function of the skinheenarahangdale01
 
Introduction to Green chemistry ppt.pptx
Introduction to Green chemistry ppt.pptxIntroduction to Green chemistry ppt.pptx
Introduction to Green chemistry ppt.pptxMuskan219429
 
The GIS Capability Maturity Model (2013)
The GIS Capability Maturity Model (2013)The GIS Capability Maturity Model (2013)
The GIS Capability Maturity Model (2013)GregBabinski
 
Project report on Fasciola hepatica.docx
Project report on Fasciola hepatica.docxProject report on Fasciola hepatica.docx
Project report on Fasciola hepatica.docxpriyanshimanchanda4
 
ROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERIC
ROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERICROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERIC
ROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERICsnehalraut2002
 
SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.
SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.
SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.kapgateprachi@gmail.com
 
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...Thane Heins
 
Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...
Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...
Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...ORAU
 
1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...
1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...
1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...klada0003
 
layers of the earths atmosphere.ppt slides for grade 9
layers of the earths atmosphere.ppt slides for grade 9layers of the earths atmosphere.ppt slides for grade 9
layers of the earths atmosphere.ppt slides for grade 9rolanaribato30
 
structure of proteins and its type I PPT
structure of proteins and its type I PPTstructure of proteins and its type I PPT
structure of proteins and its type I PPTvishalbhati28
 
20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...
20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...
20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...Sharon Liu
 

Último (20)

Theory of indicators: Ostwald's and Quinonoid theories
Theory of indicators: Ostwald's and Quinonoid theoriesTheory of indicators: Ostwald's and Quinonoid theories
Theory of indicators: Ostwald's and Quinonoid theories
 
Introduction about protein and General method of analysis of protein
Introduction about protein and General method of analysis of proteinIntroduction about protein and General method of analysis of protein
Introduction about protein and General method of analysis of protein
 
Solid waste management_13_409_U1_2024.pptx
Solid waste management_13_409_U1_2024.pptxSolid waste management_13_409_U1_2024.pptx
Solid waste management_13_409_U1_2024.pptx
 
Advance pharmacology presentation..............
Advance pharmacology presentation..............Advance pharmacology presentation..............
Advance pharmacology presentation..............
 
Phagocytosis Pinocytosis detail presentation
Phagocytosis Pinocytosis detail presentationPhagocytosis Pinocytosis detail presentation
Phagocytosis Pinocytosis detail presentation
 
Description of cultivating Duckweed Syllabus.pdf
Description of cultivating Duckweed Syllabus.pdfDescription of cultivating Duckweed Syllabus.pdf
Description of cultivating Duckweed Syllabus.pdf
 
Preparation of enterprise budget for integrated fish farming
Preparation of enterprise budget for integrated fish farmingPreparation of enterprise budget for integrated fish farming
Preparation of enterprise budget for integrated fish farming
 
Skin: Structure and function of the skin
Skin: Structure and function of the skinSkin: Structure and function of the skin
Skin: Structure and function of the skin
 
Introduction to Green chemistry ppt.pptx
Introduction to Green chemistry ppt.pptxIntroduction to Green chemistry ppt.pptx
Introduction to Green chemistry ppt.pptx
 
The GIS Capability Maturity Model (2013)
The GIS Capability Maturity Model (2013)The GIS Capability Maturity Model (2013)
The GIS Capability Maturity Model (2013)
 
Project report on Fasciola hepatica.docx
Project report on Fasciola hepatica.docxProject report on Fasciola hepatica.docx
Project report on Fasciola hepatica.docx
 
ROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERIC
ROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERICROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERIC
ROLE OF HERBS IN COSMETIC SKIN CARE: ALOE AND TURMERIC
 
SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.
SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.
SHAMPOO : OVERVIEW OF SHAMPOO AND IT'S TYPES.
 
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...
AI Published & MIT Validated Perpetual Motion Machine Breakthroughs (2 New EV...
 
Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...
Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...
Mining Data for Ore Natural Language Processing to Identify Lithium Minerals ...
 
1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...
1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...
1David Andress - The Oxford Handbook of the French Revolution-Oxford Universi...
 
layers of the earths atmosphere.ppt slides for grade 9
layers of the earths atmosphere.ppt slides for grade 9layers of the earths atmosphere.ppt slides for grade 9
layers of the earths atmosphere.ppt slides for grade 9
 
Proof-of-Concept Publicly Accessible Data Dashboards from the US-EPA.pptx
Proof-of-Concept Publicly Accessible Data Dashboards from the US-EPA.pptxProof-of-Concept Publicly Accessible Data Dashboards from the US-EPA.pptx
Proof-of-Concept Publicly Accessible Data Dashboards from the US-EPA.pptx
 
structure of proteins and its type I PPT
structure of proteins and its type I PPTstructure of proteins and its type I PPT
structure of proteins and its type I PPT
 
20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...
20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...
20240315 ACMJ Diagrams Set 2.docx . With light, motor, coloured light, and se...
 

Infrared / IR spectroscopy

  • 2. INFRARED SPECTROSCOPY IR spectroscopy is the spectroscopy that deals with the infrared region of the electromagnetic spectrum, that is light with a longer wavelength and lower frequency than visible light Infrared spectroscopy (IR) measures the bond vibration frequencies in a molecule and is used to determine the functional groups. The infrared region of the spectrum encompasses radiation with wave numbers ranging from about 12,500 to 50cm-1 (or) wave lengths from 0.8 to 200μ. Infrared region lies between visible and microwave region. Infrared Spectroscopy is the analysis of infrared light interacting with a molecule. It is based on absorption spectroscopy 1/26/2018 2
  • 3. INFRARED REGIONS INFRARED REGIONS RANGE Near infrared region 0.8-2.5 µ (12,500-4000 cm-1) Main infrared region 2.5-15 µ (4000-667cm-1) Far infrared region 15-200 µ (667-100 cm-1) 1/26/2018 3
  • 4. The infrared region constitutes 3 parts a) The near IR (0.8-2.5μm) (12,500-4000cm-1) b) The middle IR (2.5 -15μm) (4000-667cm-1) i) Group frequency Region (4000-1500cm-1) ii) Finger print Region (1500-667cm-1) c) The far IR (15-200μm) (667-50cm-1) • most of the analytical applications are confined to the middle IR region because absorption of organic molecules are high in this region. • Wave number is mostly used measure in IR absorption because wave numbers are larger values & easy to handle than wave length which are measured in μm. E = hν= hc/λ= hcν ̄ • It gives sufficient information about the structure of a compound. 1/26/2018 4
  • 5. PRINCIPLE When infrared radiation is passed through an organic compound some of the frequencies are absorbed and appear as absorption band while other frequencies are do not intrect with the compound and are transmitted without being absorbed.Only those frequencies are absorbed which match with the vibrational frequencies of the bonds. IR sectroscopy is there for basically vibrational spectroscopy . The absorption of ir radiation is associated with the excitatio of the molecule from the ground state to higher vibrational state. The absorbed energy is eventually released as heat and the molecule revert from the excited state to the orignal ground state. 1/26/2018 5
  • 7. Conti... Fundamental Vibrations: vibrational frequencies which are concerned with the individual atom called Fundamental vibration. Non Fundamental vibration: Vibrations which apears as a result of fundamental vibrations. Stretching vib: Involves a continuous change in interatomic distance along the axis of the bond between 2 atoms Involves the change in angle btw the two bonds 1/26/2018 7
  • 8. Interatomic distance btw the two atoms increase or decrease Interatomic distance btw the two atoms is Opposite or alternate All the atoms are in same plane 2 atoms are in same plane and 1 is on opposite plane 1/26/2018 8
  • 9. Scissoring: In this case, the two atoms connected to a central atom either move toward or away from each other with certain deformation of the valence angle. Rocking: In this case, the structural unit swings back and forth in the plane of the molecule. Wagging: In this case the structural unit swings back and forth out of the plane of the molecule. Twisting: In this case the structural unit rotates about the bond that joins it to the rest of the molecule. 1/26/2018 9
  • 10. Over tone: Some additional absorption bands may be observed which are genrated by the modulation of the fundamental frequencies. This leads to the overtone that appear at almost twice and thrice the fundamental frequencies with greatly reduced intensties. Combination tone: Week band that apeares occasionally at frequencies that are sum or difference of 2 or more fundamental bands. Combination band arises when absorption by a molecule result in excitation of two fundamental vibrations simutaneously. This happen when a single photon has precisely the correct energy to excite the two vibrations. In such cases the frequency of the combination band must be the exact sum of the two fundamental absorption frequencies. More than two fundamental frequencies may be involved in combinaton band. The difference band arises when a molecule already existing in an excited vibrational state absorbes enough additional energy to be excited to another vibrational level of a different vibrational mode. 1/26/2018 10
  • 11. Fermi resonance: Interaction btw fundamental vib and combination tones overtones  occurs when atoms in a molecule are in periodic motion while the molecule as a whole has constant translational and rotational motion.  The frequency of the periodic motion is known as a vibration frequency.  The value of stretching vibrational frequency of a bond can be calculated by the application of Hooke's law.  We can also calculate an approximate value of the stretching vibrational frequency of a bond by treating the two atoms and their connecting bond, to first approximation, as two balls connected by a spring, acting as a simple harmonic oscillator for which the Hooke’s Law may be applied.  According to Hooke’s Law , The Stretching frequency is related to the masses of the atom and the force constant(a measure of resistance of a bond to stretching) of a bond by the following equation 1/26/2018 11
  • 13. Conjugation:Any factor the tend to increase the contribution of the singe bond form will decrease the force constant of the carbon oxygen bond hence result in lowering the the frequency of C=O stretching vib. e.g. conjugation lowersthe C=O stretching frequency whether the conjugation is brought about by αβ-unsaturation or by an atomic ring. Mesomeric effect:Any substituent that enhance the singke bond character will decrease the bond order of C=O group and leads o lower the stretching frequency. A +M group lower the stretching freq.-M group have opposite effect. Inductive effect:substituent with an electron donating inductive effect(+I) will enhance the single bond character of the C=O group. (-I) group have opposite effect. 1/26/2018 13
  • 15. Double bond carbon atom in unstrained molecules have planer trigonal geometry with a bond angle of 120° Increase in absorption freq with the decrease in bond angle can be explained in terms of bond angular strain.Reduction in bond angle below 120 leads to an increased in s character in double bond resulting in shortening and strengthening of a double bond. It is observed in compounds containing -CH2 and -CH3. e.g Carboxlic acid anhydride,amides 1/26/2018 15
  • 16. There are 2 types of infrared spectrophotometer, characterized by the manner in which the ir frequencies are handled. – 1) dispersive type (IR) – 2) interferometric type(FTIR) In dispersive type the infrared light is separated into individual frequencies by dispersion, using a grating monochromator. In interferometric type the ir frequencies are allowed to interact to produce an interference pattern and this pattern is then analyzed, to determine individual frequencies and their intensities. 1/26/2018 16
  • 17. It is double beam instrument.The main components of Dispersive ir spectrophotometer are: Radiation source Sample compartment opticle chopper monochrometer detector amplifier readout device 1/26/2018 17
  • 19. 1)Infrared Sources The most common source is either Nernst filament or Globar The Nernst filament is composed of a mixture of oxide of zirconium,thorium and yattrium, which is formed into a hollow rod about 2mm in diameter and 2-5 cm in length. Globar is a bonded silicon carbide rod about 7mm in diameter and 5 cm in length. On heating electrically (1000-1800C) these rods emit infrared radiations. 2)Sampling Area(Optical null method): The radiation is divided into two beams of equal intensties which are focused into the sampling area. One beam pass through the sample while the other serves as the reference beam.Absorption by the sample is measured directly from the difference in intensties of two beams. The intensity difference is usually measured by optical null method inthis instrument. In this method afer passing through the sampling area the reference beam pass through an optical wedge which limits the amount of radiation that passes through it. 3)Chopper: The two beams are now reflected to a light chopping device.As the chopper rotates it causes the sample beam and reference beam to be reflected aternately to the monochromator. 1/26/2018 19
  • 20. 4)Monochromators Three types of substances are normally employed as monochromators, namely : (i) Metal Halide Prisms : Various metal halide prisms, such as : KBr (12-25 μm), LiF (0.2-6 μm) and CeBr (15-38 μm) have been used earlier, but they have become more or less obsolescent nowadays. (ii) NaCl Prism (2-15 μm) : Sodium chloride prism are of use for the whole of the region from 4000- 650 cm–1. First, it offers low resolution at 4000-2500 cm–1, and secondly, because of its hygroscopic nature the optics have got to be protected at 20 °C above the ambient temperature. (iii) Gratings : In general, gratings are commonly employed in the design of the instruments and offer better resolution at higher frequency than the prisms. They offer much better resolution at low frequency, viz., typical rulings are 240 lines per nm for the 4000-1500 cm–1 region and 120 lines per nm for the 1500-650 cm–1 region. 1/26/2018 20
  • 21. 5)Detectors a)Thermocouples (or Thermopiles): The underlying principle of a thermocouple is that if two dissimilar metal wires are joined head to tail, then a difference in temperature between head and tail causes a current to flow in the wires. In the infrared spectrophotometer this current shall be directly proportional to the intensity of radiation falling on the thermocouple. Hence, the thermocouples are invariably employed in the infrared region, and to help in the complete absorption of ‘available energy’ the ‘hot’ junction or receiver is normally blackened. b)Golay Detector: In this specific instance the absorption of infrared radiation affords expansion of an inert gas in a cell-chamber. One wall of the cell-chamber is provided with a flexible mirror and the resulting distortion alters the intensity of illumination falling on a photocell from a reflected beam of light. Thus, the current from the photocell is directly proportional to the incident radiation. 1/26/2018 21
  • 23. d)Thermistors •It is made up of metal oxides. •It functions by changing resistance when heated. •It consists of two closely placed thermistor flakes, one of the 10 um is an active detector, while the other acts as the compensating / reference detector. •A steady voltage is applied, due to the temperature increase there is change in resistance which is measured and this gives the intensity of the IR radiation 1/26/2018 23
  • 24. 6)Recording: When the sample has absorbed radiation of a perticular frequency,the detector will be receiving alternately an intense reference beam and weak sample beam.This will in effect lead to an alternating current which is flown to an amplifier.The amplifier is coupled coupled to small sevo-meter which drives the optical wedge into the reference beam untl the detector receives radiations of equal intensties from the sample and the reference beams until the difference in intensties of the two beams is zero or in other words the instrument is at an optical null. The wedge is coupled to a recorder pen so that the movement of the wedge in and out of the reference beam is accompained by movement of a pen on the printed paper which thus records the absorption bands. 1/26/2018 24
  • 25. a)Gas Sample: A gas sample is introduced into an evacuated gas cell.Gas cells are available in lenghts ranging from a few cm to some meters. The sampling area of standard dispersive IR spectrophotometer is about 10cm. So long path are achieved by using multiple pass gas cells in which internal mirrors permit the beam to be reflected several times through the sample before it exits the gas cell. b)Liquid Sample: It is examined as thin film squeezed btw two optically polished circular flat plates(about 5mm thick and 25mm in dm) of rock salt(NACl). Pressing a small drop of liquid sample btw the plates produces a film of about 0.1mm thick. The plates are held together by capillary action are mounted in sample beam. Plates are cleaned and dried immediately after use by rinsing in suitable solvent such as chloroform. 1/26/2018 25
  • 26. c)Solid Sample: Mull technique: Mulls are prepared by grinding 2-5mg of sample in smooth mortar with pestle of agate,adding 1 or 2 drops of mulling agent and continue grinding to get a homogenous paste.The mull is examined as thin film btween the NACl plates. Nujol is commonly used as mulling agent. Pressed Pellet Technique: Grind and mix about 1.0mg of solid sample with about 100mg of dry powdered KBr in mortar. to prepare KBr discs. Then this solid solution is compressed under pressure (about 20,000 psi) in vacuo with a special die to form transparent disc. Discs are usually 10mm in diameter and 1mm thick. KBr does not absorb in the IR region so complete spectrum of sample is obtained. 1/26/2018 26
  • 27. d)Sample As Solution: Sample can also be examined as solution in solvents such as CCl4 or Chloroform. Solutions(1-5%) are handled in cells of 0.1-1.0mm pathlength. A 2nd cell containing pure solvent is placed in reference beam. The wavelength (or wave number) scale calibration of infrared spectrophotometers is usually carried out with the aid of a strip of polystyrene film fixed on a frame. It consists of several sharp absorption bands, the wavelengths of which are known accurately and precisely. Basically, all IR-spectrophotometers need to be calibrated periodically as per the specific instructions so as to ascertain their accuracy and precision. 1/26/2018 27
  • 28. An infrared spectrum may be divided into 2 parts. the part ranging from 4000-1600cm-1 is known as Functional group region,while that ranging from 1600-625cm-1 is called Fingerprint region. Functional group region: In this region most compounds have only a few strong bands due to the characteristic stretching vibration of their functional groups. For example the functional group of X-H type (C-H,O-H) absorb in the region 3700-2500 cm-1. Absorption due to triple bond occur 2300-2100cm-1 and due to double bond at 1900-1600cm-1. Fingerprint region: It is much more difficult to pick out individual bonds in this region than it is in the "cleaner" region at higher wavenumbers. The importance of the fingerprint region is that each different compound produces a different pattern of troughs in this part of the spectrum. e.g Characteristic absorption bands corresponding to aromatic ring system fall in the 1600-1450cm-1. Aromatic compounds display strong adrosption bands in 900-700cm-1. 1/26/2018 28
  • 29. A method of obtaining an Infrared spectrum by measuring the interferogram of a sample using an interferometer, then performing a Fourier Transform upon the interferogram to obtain the spectrum. It is single beam instrument. The Interferometer: An device in which two or more radiation beams interfere with each other after passing through different optical paths. The interferometer produces a unique type of signal which has all of the infrared frequencies “encoded” into it. The output is an interferogram or interference record. The two domains of Distance and Frequency are inter convertible by the mathematical method of Fourier transformation. Majority of commercially avaiable FT-IR are based on an inetrferometer commonly Michelson interferometer. 1/26/2018 29
  • 31. Michelson interferometer: It has three basic components a beam splitter,fixed mirror, and a moveable mirror. Beam splitter is semi-reflecting device so that 50% oof light impinging on it is transmitted while the remaining 50% is reflected. It is either a Partially silvered mirror or thin film of germanium (Ge) sendwiched btw two KBr plates. IR light received from source is split into two identical beams by the beam splitter such that one beam is reflected to the fixed flat mirror while the other beam is transmitted to the moveable flat mirror. The two beams are reflected back by their respective mirrors to recombine at the beam splitter to again form one beam which passes through the sample and is then focused on detector. Of course,each of the two beams reflected back by their respective mirror is again split into two equal halves by the beam splitter.one half of each beam goes to detector while the half of each beam goes back to the source.The sample can be use directly without the prepration of mull or KBr discs or solution. 1/26/2018 31
  • 32. Detectors of FT-IR: 1. Pyroelectric detectors a thin, Pyroelectric crystals such as deuterated triglycine sulfate (DTGS) or LITA (lithium tantalate), When a pyroelectric material is polarized by an electric field, it remains polarized after the field is removed due to an effect called residual electric polarization. This residual polarization is sensitive to changes in temperature. 2. Photoconductive detectors show an increase in electrical conductivity when illuminated with IR radiation, They have a rapid response and high sensitivity. The most commonly used photoconductive detector is the MCT (Mercury Cadmium Telluride), which must be cooled to liquid nitrogen temperatures for proper operation. 1/26/2018 32
  • 33. Advantages of Fourier transform IR over dispersive IR • Improved frequency resolution • Improved frequency reproducibility (older dispersive instruments must be recalibrated for each session of use) • Faster operation • Computer based (allowing storage of spectra and facilities for processing spectra) • Energy limiting accessories such as diffuse reflectance or FT-IR microscopes • High resolution experiments (as high as 0.001 cm-1 resolution) • Trace analysis of raw materials or finished products • Depth profiling and microscopic mapping of samples • Kinetics reactions on the microsecond time-scale • Analysis of chromatographic and thermogravimetric sample fractions 1/26/2018 33
  • 34. Interferogram: The light signal measured by the detector is known as Interferogram. An interferogram is time domain interference signal,and represents the detector's response to the itensity changes against time within the mirror scan. Movement of the moveable mirror back and forth once is known as scan. Fourier Transformation: The time domain interferogram obtained as detector's response cannot be interpreted as such.It is subjected to furier transformation (a mathematical operation performed by an attached computer) which converts it into a frequency-domain spectrum. 1/26/2018 34
  • 36. • A = Infrared source • B = Sample beam • C = Chopper • D = Monochromator grating • E = Detector thermopile • F = Amplifier • G = Servo-motor • H = An optical Wedge • I = Prism • J = Ink-pen recorder • K = Slits 1/26/2018 36
  • 37. APPLICATIONS OF IR SPECTROSCOPY Structure determination: IR spectroscopy i mainly used for determination of structure of organic compounds by correlation and interpretation of IR spectra. Identification of Substances: • To compare spectrums. • No two samples will have identical IR spectrum. • Criteria: Sample and reference must be tested in identical conditions, like physical state, temperature, solvent, etc. Determination of Molecular Structure • Used along with other spectroscopic techniques. Identification is done based on position of absorption bands in the spectrum. Eg.: C=O at 1717 cm-1. • Absence of band of a particular group indicates absence of that group in the compd. 1/26/2018 37
  • 38. Detection of Impurities • Determined by comparing sample spectrum with the spectrum of pure reference compound. • Eg.: ketone impurity in alcohols. • Detection is favoured when impurity possess a strong band in IR region where the main substance do not possess a band. Progress of Reactions • Observing rate of disappearance of characteristic absorption band in reactants or • Rate of increasing absorption bands in products of a particular product. Presence of Water in Sample If lattice water is present, spectra will contain 3 characteristic bands  at 3600-3200cm-1, 1650cm-1 and 600-300cm-1. Application In Industry Determine impurities in raw materials (to ensure quality products). For Quality Control checks; to determine the % of required product. Identification of materials made in industrial research labs, or materials of competitors. E.g.: Impurity in bees wax (with petroleum wax) 1/26/2018 38
  • 39. Reference: Books Organic spectroscopy and Chromatography by M.Younas Pharmaceutical Drug Analysis By Ashutosh Kar Web https://www.chemguide.co.uk https://www.slideshare.net 1/26/2018 39